text.skipToContent text.skipToNavigation
Close 

You are on the Pilz international website



Please select a language or switch to a country
Choose your country to get national content

PSEN cs3.1b 1 switch

Product ID: 541062
RFiD safety switch, 2 safe SC outputs, connection cable 10 m, one actuation direction, IP6K9K, typ. operating distance 11 mm, Sao = 8mm, Sar = 20 mm, PU = 1 piece coded switch.

Item

On request

Save basket

Create a new order or get an individual offer

Select intended use

Approval CE  
UKCA  
cULus Listed  
FCC  
IC  
EAC (Eurasian)  
TÜV  
Sensor principle Transponder  
Coding level to ISO 14119 Low  
Classification to EN 60947-5-3 PDDB  
Transponder coding coded  
Suitable for series connection yes  
unit type Sensor  
 
Supply voltage (V) 24  V
Type of supply voltage U1 DC  
Power consumption DC 1  W
Number of inputs 2  
DC voltage at input 24 V DC  
Number of OSSD outputs 2  
Number of sig. outputs 1  
Potential isolation S/C O No  
S/C output short circuit proof Yes  
Utilisation cat. to EN 60947-1 DC-12  
Ambient temperature standard EN 60068-2-14  
Ambient temperature -25 - 70  °C
Storage temperature standard EN 60068-2-1/-2  
Climatic suitability standard EN 60068-2-78  
Humidity rating 93 % r. h. at 40 °C  
EMC to standard ... EN 60947-5-3  
Vibration to standard ... EN 60947-5-2  
Acc. shock to standard1 30g  
Overvoltage category III  
Pollution degree clear.&creep. 3  
Protection type, housing  
Change op. distance temp.act.1 +-0.01mm/°C  
Change op. distance temp.act.2 +-0.1mm/°C  
Change op. distance temp.act.3 +-0.01mm/°C  
Change op. distance temp.act.4 +-0.01mm/°C  
Bend radius (when laying) K1 5 x Ø  
Sensor can be flush-mounted Yes, follow installation guide  
Connection type 10 m cable  
Cable lines Li9Y11Y 8 x 0.14 mm2  
Housing material upper part PBT  
Height dimension 37  mm
Width dimension 26  mm
Depth dimension 18  mm
Gross weight 410  g
Operating frequency 122 kHz - 128 kHz  
 
RoHS directive 2011/65/EU  
2015/863/EU  
RoHS conformity yes  
RoHS exceptions yes  
RoHS except.s acc. to direct. 7A  
7C I  
REACh compliance contains min. 1 SVHC-substance  
REACh included substances Lead  
Lead oxide  
%-part of the pollutant > 0,1%  
CAS No. 7439-92-1  
1317-36-8  
WEEE classifikation (08/2018) 5 devices (feed size < 50cm)  
 
Harmonized System Code 85365019  
EAN-Code 4046548073812  
ECLASS version ECLASS-13  
ECLASS Reference Feature 27274601  
ETIM Version ETIM-9.0  
ETIM Reference Group EG000026  
ETIM Reference Feature EC002592  
Volume 0  
 

Installation accessories

PSEN cs3.1   1 actuator
PSEN cs3.1 1 actuator 541080
Actuator for coded safety switch PSENcode 3.x PU = 1 piece actuator.
PSEN cs1.1   1 actuator
PSEN cs1.1 1 actuator 540080
Actuator for coded safety switch PSENcode 1.x/2.x, PU = 1 piece actuator.
PSEN cs3.1 low profile glue 1 actuator
PSEN cs3.1 low profile glue 1 actuator 541087
RFiD actuator for safety switch PSEN cs3.x, IP67, adhesive, without screw-on option, PU = 1 piece.
PSEN cs3.1 low profile screw 1 actuator
PSEN cs3.1 low profile screw 1 actuator 541088
RFiD actuator for safety switch PSEN cs3.x, IP67, adhesive, with screw-on option, PU = 1 piece.

Optional accessories

PSEN/PDP67 M12-8sm  screw terminals
PSEN/PDP67 M12-8sm screw terminals 540334
Plug-in connector, 8-pin, connector straight M12, A-coded, screw connection, material threaded ring: Zinc die castingnickel-plated, outer cable diameter 6-8mm
SDD ES ETH
SDD ES ETH 540130
SDD (Safety Device Diagnostics), fieldbus module, standard, Modbus/TCP,2 RJ45 ports, 6 digital inputs/outputs, plug-in connection terminals (not supplied with the unit).
SDD ES PROFIBUS
SDD ES PROFIBUS 540132
SDD (Safety Device Diagnostics), fieldbus module, standard, Profibus DP,9 DP-V0, 9-pin D-Sub connector, 6 digital inputs/outputs, plug-in connection terminals (not supplied with the unit).

Obligatory accessories

PSEN cs3.1   1 actuator
PSEN cs3.1 1 actuator 541080
Actuator for coded safety switch PSENcode 3.x PU = 1 piece actuator.
PSEN cs1.1   1 actuator
PSEN cs1.1 1 actuator 540080
Actuator for coded safety switch PSENcode 1.x/2.x, PU = 1 piece actuator.
PSEN cs3.1 low profile glue 1 actuator
PSEN cs3.1 low profile glue 1 actuator 541087
RFiD actuator for safety switch PSEN cs3.x, IP67, adhesive, without screw-on option, PU = 1 piece.
PSEN cs3.1 low profile screw 1 actuator
PSEN cs3.1 low profile screw 1 actuator 541088
RFiD actuator for safety switch PSEN cs3.x, IP67, adhesive, with screw-on option, PU = 1 piece.