Close
You are on the Pilz international website
Please select a language or switch to a country
Choose your country to get national content
PITestop, E-STOP pushbutton IP65, with protective collar, with
key-release, without Pilz inscription on the actuator,
in ...
On request
PITsign indicator light unit red, yellow, green including LED, mountingfoot,
conduit pipe (250 mm), UB = 24 V DC, protec ...
On request
PITsign muting lamp in accordance with EN 61496 including incandescentlamp and
wall mounting, permanent light with optio ...
On request
PITsign LED muting lamp including LED and wall mounting, UB = 24 V DC /
4 W / <200 mA, protection type housing: IP65, di ...
On request
PITsign muting lamp including incandescent lamp and wall mounting, UB =24 V DC
/ 5 W / 300 mA, protection type housing: ...
On request
PITestop, E-STOP/contact block set, consisting of E-STOP pushbuttonwithout
logo and contact block, 2 N/C, terminals (scr ...
On request
PITestop, contact block, 1 N/C with monitoring, 1 N/O, flat connector.
On request
PITestop, contact block, 2 N/C, terminal (screw type).
On request
PITestop, E-STOP pushbutton IP65, without logo, installation diameter:22.3 mm.
On request
PITestop, E-STOP pushbutton IP65, illuminated, without logo,
installation diameter: 22.3 mm, with spring-loaded terminal ...
On request
PITestop, E-STOP pushbutton IP65, illuminated, with E-STOP symbol andwith
logo and spring-loaded terminals, installation ...
On request
PITestop, E-STOP/contact block incl. surface mount housing, setconsisting of E-STOP pushbutton
with E-STOP symbol and lo ...
On request
PITmode connector set for electronic operating mode selector switch PITm3.2p.
Consisting of 1 x 5-pin and 1 x 12-pin fem ...
On request
PITenable 3-step enable switch, 5 m connection cable and M12
angled connector.
On request
PITmode connector set for electronic operating mode selector switch PITm3p.
Consisting of 1 x 8-pin and 1 x 10-pin femal ...
On request
Enabling switch, 3 levels, 1 signal contact, 6-core cable (5 m) with
open end.
On request
PITestop, E-STOP pushbutton IP6K9K, without logo, for hygiene areas,
installation diameter: 22.3 mm.
On request
PITestop, E-STOP pushbutton IP65, with protective collar, without logo,
installation diameter: 22.3 mm.
On request
PITestop, E-STOP pushbutton IP65, key switch, with E-STOP symbol and
with logo, installation diameter: 22.3 mm.
On request
Added to Your Shopping Cart
Save basket
Create a new order or get an individual offer