Compare 0

Please select your location to go directly to the relevant Pilz country homepage. If you cannot select your country, click here: Global Site

Close
Ireland | english
You have now of 6 products to compare

Light beam devices PSENopt II

Robust light grid for finger and hand protection

Light beam devices PSENopt II

Light grids PSENopt II help to safeguard interventions in the production process. Depending on requirements, they provide finger and hand protection and are suitable for applications up to PL e in accordance with IEC/EN 61496-1/-2. As the units are so robust they provide protection against shock, collision or vibration, even in rugged industrial environments.

The light beam devices are available in lengths from 150 mm to 1800 mm. PSENopt II can be connected directly to the PDP67 due to the 5-pin connection. Compatible accessories range from the laser through to bracket kits.

PSENopt II now also available as a Type 4 light grid!

A Type 4 version of the PSENopt II is now also available. This is suitable for applications up to PL e in accordance with IEC/EN 61496-1/-2. As the units are so robust they provide protection against shock, collision or vibration, even in rugged industrial environments. The operator can evaluate the essential causes and system defects responsible for the machine stop by means of the LEDs. This reduces downtimes. PSENopt II can be installed quickly and simply using fitting aids. The absence of dead-zones enables flexible installation with enhanced safety. PSENopt II can be connected directly to the PDP67 due to the 5-pin connection, so offering a complete, safe solution.

PSENopt II Type 4 light grid

Benefits of PSENopt II at a glance

  • Finger and hand protection for your PL d or PL e application
  • Highly robust for protection against shock, collision and vibration
  • User-friendly diagnostics via LEDs to reduce downtimes
  • Flexible use with enhanced safety – thanks to freedom from dead zones
  • Rapid and simple assembly, installation and commissioning
  • Protection against shock, collision or vibration, even in rugged industrial environments
  • Safe and economical all-in-one solution with PDP67 and comprehensive accessories
Benefits of PSENopt II at a glance

Features of light beam devices

Features of light beam devices
  • Compliant and approved in accordance with EN/IEC 61508 and EN/IEC 61496-1 (Type 3) or EN/IEC 61496-1/-2 (Type 4)
  • Designed for applications up to PL d of EN ISO 13849-1
  • Safety for finger and hand protection
  • Lengths from 150 to 1800 mm
  • Robustness of 50 g
  • Freedom from dead zones
  • Complete solution with PDP67, PNOZmulti, PNOZ X2.8P, PNOZ s3

Applications of PSENopt II

Protect your workers and your capital goods with the light beam devices PSENopt II! The light beam device protects the danger zones with an invisible protected field of infrared beams. If the light beam is interrupted, a safe shutdown command is issued immediately.

In accordance with IEC/EN 61496, PSENopt II light grids are suitable for Type 3 applications with Category PL d or Type 4 applications with Category PL e:

Can be used in applications in accordance with Type 1 Type 2 Type 3 Type 4

EN ISO 13849-1

EN/IEC 62061

 

PLc

SIL 1 and SIL CL 2

PLd

SIL 2 and SIL CL 2

PLe

SIL 3 and SIL CL 3

PSENopt II are available for finger and hand protection and are therefore especially suitable for manual workstations, inserting/removing materials or materials handling next to robots.

Further information on IEC/EN 61496 can be found here.

Applications of PSENopt II

Industry uses of light grids

Industry uses of light grids
  • Automotive
  • Packaging
  • Machine tools
  • Metalworking
  • Presses

Our portfolio: Light beam devices PSENopt II

Standard light guard Type 3, hand protection

Standard Type 3 light guards PSENopt II are suitable for hand protection in accordance with EN/IEC 61496-1.
Standard light guard Type 3, finger protection

Standard light guard Type 3, finger protection

Standard Type 3 light guards PSENopt II are suitable for finger protection in accordance with EN/IEC 61496-1.

Standard light curtain Type 4, finger protection

Standard Type 4 light curtains PSENopt II are suitable for finger protection in accordance with EN/IEC 61496-1/-2.

Standard light curtain Type 4, hand protection

Standard Type 4 light curtains PSENopt II are suitable for hand protection in accordance with EN/IEC 61496-1/-2.

Accessories PSENopt II

Perfectly adapted to light barriers PSENopt II: Compatible accessories for quick and easy installation.

Download

Please wait while data is being loaded

Please wait while data is being loaded