Accessories for PMCtendo DD servo amplifiers - Technical features

Cable assembled on both sides DD4 connector <> round connector 8-pin No. of wires and cross section 4 x 1.5 + 1 x (2 x 1.0) Trailing, length: 10 m.

Cable assembled on both sides Sub-D15 connector <> round connector 12-pin suitable for all PMC servo controllers (DD4, DD5, protego) Length: 10 m.

Cable assembled on both sides DD4 connector <> round connector 8-pin No. of wires and cross section 4 x 1.5 + 1 x (2 x 1.0) Trailing, length: 15 m.

Cable assembled on both sides Sub-D15 connector <> round connector 12-pin suitable for all PMC servo controllers (DD4, DD5, protego) Length: 15 m.

Cable assembled on both sides DD4 connector <> round connector 8-pin No. of wires and cross section 4 x 1.5 + 1 x (2 x 1.0) Trailing, length: 20 m.

Cable assembled on both sides Sub-D15 connector <> round connector 12-pin suitable for all PMC servo controllers (DD4, DD5, protego) Length: 20 m.

Cable assembled on both sides Sub-D15 connector <> round connector 12-pin suitable for all PMC servo controllers (DD4, DD5, protego) Length: 8 m.

Cable assembled on both sides DD4 connector <> round connector 8-pin No. of wires and cross section 4 x 1.5 + 1 x (2 x 1.0) Trailing, length: 8 m.

consisting of: Connector X3, X4, X7, X8 Connector 0A, 0B.

Connector kit "X9", for device sizes up to 20 A.

Expansion card with 14 inputs and 8 outputs can be used in PMCtendo DD4 & PMCtendo DD5 & PMCprotego.

Output filter between servo controller and motor Rated current: 4 A.

Output filter between servo controller and motor Rated current: 10 A.

Expansion card PROFIBUS-DP slave 187.5 KBaud - 12 Mbaud, only for PMCtendo-DD4 Note: Operating the PROFIBUS card is not possible with controller firmware version 5.16.

Use in PMCtendo DD4 and DD5 Interfaces: CAN-in, CAN-out, RS232 with termination and monitoring voltage switch.

Cable assembled on both sides Sub-D9 connector <> round connector 12-pin Trailing capability suitable for all PMC servo controllers (DD4, DD5, protego) Length: 10 m.

Cable assembled on both sides Sub-D9 connector <> round connector 12-pin Trailing capability suitable for all PMC servo controllers (DD4, DD5, protego) Length: 5 m.

Cable assembled on both sides Sub-D15 connector <> round connector 12-pin suitable for all PMC servo controllers (DD4, DD5, protego) Length: 5 m.

Cable assembled on both sides DD4 connector <> Ring cable shoe for terminal box No. of wires and cross section 4 x 1.5 + 1 x (2 x 1.0) Trailing, length: 5 m.

Cable assembled on both sides DD4 connector <> Ring cable shoe for terminal box No. of wires and cross section 4 x 1.5 + 1 x (2 x 1.0) Trailing, length: 10 m.

Cable assembled on both sides DD4 connector <> round connector 8-pin No. of wires and cross section 4 x 1.5 + 1 x (2 x 1.0) Trailing, length: 5 m.

Cable assembled on both sides Sub-D9 connector <> round connector 12-pin Trailing, length: 15 m suitable for all PMC servo controllers (DD4, DD5, protego).

Rated current: 42 A Typ. power dissipation: 15 W Protection class: IP20 Connection type: Terminals.

Cable assembled on both sides DD4 connector <> Ring cable shoe for terminal box No. of wires and cross section 4 x 1.5 + 1 x (2 x 1.0) Trailing, length: 15 m.

Mains filter Rated current: 30 A, power dissipation typ.: 12 W Protection class: IP20, connection type: Terminals.