In accordance with the Machinery Directive, plant and machinery must be fitted with emergency stop equipment so that a hazard can be averted or reduced in the case of an emergency. In a dangerous situation, emergency stop control devices are operated manually, triggering a signal to halt a potentially hazardous movement. If the emergency stop command is triggered, the emergency stop control device is latched in. This must be maintained until the control device is released manually. It is not necessary for power to be removed from the entire machine.
Emergency stop halts a hazardous movement
Emergency switching off device removes power to the system
In contrast to an emergency stop, an emergency switching off device completely removes the power to the system.
Standards for emergency stop
EN ISO 13850 Safety of machinery. Emergency stop. Principles for design
Top
Contact
Pilz Skandinavien K/S, sivuliike Suomessa
Elannontie 5
01510 Vantaa
Finland
Telephone: +358 10 3224030
E-Mail: [email protected]
Technical Support
Telephone: +358 10 3224030 / +45 74436332
E-Mail: [email protected]
Was this article helpful?