The motor is allowed to travel a permitted distance following a start command. A safe stop function must be triggered once the limit value is reached. If the permitted distance is exceeded, this must be detected and the drive must be safely brought to a standstill. Encoder systems with relative measurement are sufficient for this safety function.
Safely Limited Increment (SLI)
Contact
Pilz Skandinavien K/S
Ellegårdvej 25 D
6400 Sønderborg
Denmark
Telephone: +45 74436332
E-Mail: pilz@pilz.dk
Technical Support
Telephone: +45 74436332
E-Mail: support@pilz.dk
Was this article helpful?