Protective devices

Protective devices

Protective devices do not prevent access or entry into the machine's danger zone, but safely shut down the hazardous movements when the protective device is activated. Such protective devices may include, for example, light barriers, light curtains, scanners, pressure-sensitive mats or two-hand control devices.

Protection against unexpected start-up/restart of a machine

Two-hand control devices prevent injuries to hands or other body parts. The machine function/control command can only be triggered by using both hands, which are in a safe position during this operation.

 

Standards for protective devices

Standard Title
EN IEC 61496-1

Safety of machinery
Electrosensitive protective equipment - Part 1:
General requirements and tests

EN IEC 61496-2

Safety of machinery
Electrosensitive protective equipment - Part 2:
Particular requirements for equipment using active opto-electronic protective devices

EN IEC 61496-3

Safety of machinery
Electrosensitive protective equipment - Part 3:
Particular requirements for active opto-electronic protective devices responsive to diffuse reflection (AOPDDR)

EN ISO 13855

Safety of machinery
Positioning of safeguards with respect to the approach speeds of parts of the human body

EN ISO 13851

Safety of machinery
Two-hand control devices - Principles for design and selection

EN ISO 13856-1/-2/-3

Safety of machinery - Pressure-sensitive protective devices
General principles for design and testing of
Part 1: Pressure-sensitive mats and pressure-sensitive floors
Part 2: Pressure-sensitive edges and pressure-sensitive bars
Part 3: Pressure sensitive bumpers, plates, wires and similar devices

 

Would you like further information? Read more in Chapter 4.3! The Safety Compendium contains the latest knowledge on machinery safety.

Safety Compendium
Contact

Pilz Czech s.r.o.
Jeremenkova 1160/90a
140 00 Praha 4
Czech Republic

Telephone: +420 222 135353
E-Mail: info@pilz.cz

Technical Support (office hours)

Telephone: +420 222 135354
E-Mail: Support@pilz.cz

Was this article helpful?