text.skipToContent text.skipToNavigation
Close 

You are on the Pilz international website



Please select a language or switch to a country
Choose your country to get national content
  1. Home
  2. Sensor technology
956 Products found
PSEN cs4.1n / PSEN cs4.1 1 Unit
541103
GTIN: 4046548060812
PSEN cs4.1n / PSEN cs4.1 1 Unit
RFiD safety switch 2 safe SC outputs, 5-pin M12 male connector, one actuation direction, IP67, switching distance 11 mm, Sao = 8 mm, Sar= 20 mm, PU = 1 piece fully coded switch with actuator. A total of 8 teach-in processes is possible.

On request
PSEN ma1.4a-50/PSEN ma1.4-03mm/ 1unit
506320
GTIN: 4046548060355
PSEN ma1.4a-50/PSEN ma1.4-03mm/ 1unit
Magnetic safety switch 2 n/o, square design, IP6K9K, operating distance 3 mm, 5 m cable, height design 18 mm, PU = 1 sensorwith actuator.

On request
PSEN ma1.4n-50/ 1switch
506312
GTIN: 4046548060331
PSEN ma1.4n-50/ 1switch
Magnetic safety switch 2 n/o, 5-pin M12 male connector, square design, IP67, operating distance depending on the actuator,height design 18 mm, PU = 1 sensor.

On request
PSEN cs4.1n 1switch
541153
GTIN: 4046548060867
PSEN cs4.1n 1switch
RFiD safety switch 2 safe SC outputs, 5-pin M12 male connector, one actuation direction, IP67, switching distance 11 mm, Sao = 8 mm, Sar= 20 mm, PU = 1 piece fully coded switch without actuator. A total of 8 teach-in processes is possible.

On request
PSEN op2H-s-30-030/1
630721
GTIN: 4046548061758
PSEN op2H-s-30-030/1
Safety light curtain, type 2, PL c, hand protection (resolution 30 mm) Protected field height 300 mm, supply voltage 24 V, connector M12, sender: 4-pin, receiver: 5-pin, Connection cable not supplied with the unit.

On request
PSEN op2H-s-30-015/1
630720
GTIN: 4046548061741
PSEN op2H-s-30-015/1
Safety light guard, Type 2, PL c, hand protection (resolution 30 mm), protected field height 150 mm, supply voltage 24 V, connector M12, transmitter: 4-pin, receiver: 5-pin, connection cable not supplied with the device.

On request
PSEN op2H-s-30-045/1
630722
GTIN: 4046548061765
PSEN op2H-s-30-045/1
Safety light guard, Type 2, PL c, hand protection (resolution 30 mm), protected field height 450 mm, supply voltage 24 V, connector M12, transmitter: 4-pin, receiver: 5-pin, connection cable not supplied with the device.

On request
PSEN op2H-s-30-075/1
630724
GTIN: 4046548061789
PSEN op2H-s-30-075/1
Safety light guard, Type 2, PL c, hand protection (resolution 30 mm), protected field height 750 mm, supply voltage 24 V, connector M12, transmitter: 4-pin, receiver: 5-pin, connection cable not supplied with the device.

On request
PSEN op2H-s-30-060/1
630723
GTIN: 4046548061772
PSEN op2H-s-30-060/1
Safety light guard, Type 2, PL c, hand protection (resolution 30 mm), protected field height 600 mm, supply voltage 24 V, connector M12, transmitter: 4-pin, receiver: 5-pin, connection cable not supplied with the device.

On request
PSEN op4H-s-30-030/1
630761
GTIN: 4046548062205
PSEN op4H-s-30-030/1
Safety light guard, Type 4, PL e, hand protection (resolution 30 mm), protected field height 300 mm, supply voltage 24 V, connector M12, transmitter: 4-pin, receiver: 8-pin, connection cable not supplied with the device.

On request
PSEN op4F-s-14-180/1
630751
GTIN: 4046548061987
PSEN op4F-s-14-180/1
Safety light guard, Type 4, PL e, finger protection (resolution 14 mm), protected field height 1800 mm, supply voltage 24 V, connector M12, transmitter: 4-pin, receiver: 8-pin, connection cable not supplied with the device.

On request
PSEN op4H-s-30-045/1
630762
GTIN: 4046548062212
PSEN op4H-s-30-045/1
Safety light curtain, Type 4, PL e, hand protection (resolution 30 mm), protected field height 450 mm, supply voltage 24 V, terminator M12, transmitter: 4-pin, receiver: 8-pin, connection cable not supplied with the device.

On request
PSEN op4H-s-30-135/1
630768
GTIN: 4046548062274
PSEN op4H-s-30-135/1
Safety light guard, Type 4, PL e, hand protection (resolution 30 mm), protected field height 1350 mm, supply voltage 24 V, connector M12, transmitter: 4-pin, receiver: 8-pin, connection cable not supplied with the device.

On request
PSEN enc s2 eCAM
544012
GTIN: 4046548074277
PSEN enc s2 eCAM
Absolute encoder, single-turn, with two redundant SSI interfaces, solid shaft 10 mm, feather key.

On request
PSEN ma1.3b-29/PSEN ma1.3-08/8mm/1 unit
506219
GTIN: 4046548075007
PSEN ma1.3b-29/PSEN ma1.3-08/8mm/1 unit
Magnetic safety switch 3 n/o, round M12 design, IP65, LED, operating distance 8 mm, PU = 1 piece with M12 actuator, with 10 m cable (PUR).

On request
PSEN b4.1
540041
GTIN: 4046548062199
PSEN b4.1
Mechanical bolt, for safety switch PSEN cs3/4 or PSEN ma1, with locking (cannot be deactivated) and escape release.

On request
PSEN op4H-s-30-105/1
630766
GTIN: 4046548062250
PSEN op4H-s-30-105/1
Safety light curtain, Type 4, PL e, hand protection (resolution 30 mm), protected field height 1050 mm, supply voltage 24 V, terminator M12, transmitter: 4-pin, receiver: 8-pin, connection cable not supplied with the device.

On request
PSEN op2H-A-30-105/1
631045
GTIN: 4046548075601
PSEN op2H-A-30-105/1
Safety light guard, Type 2, PL c, hand protection (resolution 30 mm), protected field height 1050 mm. Features: Muting, blanking, cascading, absence of dead zones. Programming is possible via Software PSENoptConfigurator or directly on the light guard. Supply voltage 24 V, connection via 18-pin pigtail cable on M12 connector. Connector M12 transmitter: 5- pin, receiver: Blanking 12-pin, muting 12-pin/5-pin. Pigtail cables are not supplied with the device.

On request
PSEN op2H-A-30-060/1
631042
GTIN: 4046548075571
PSEN op2H-A-30-060/1
Safety light guard, Type 2, PL c, hand protection (resolution 30 mm), protected field height 600 mm. Features: Muting, blanking, cascading, absence of dead zones. Programming is possible via Software PSENoptConfigurator or directly on the light guard. Supply voltage 24 V, connection via 18-pin pigtail cable on M12 connector. Connector M12 transmitter: 5- pin, receiver: Blanking 12-pin, muting 12-pin/5-pin. Pigtail cables are not supplied with the device.

On request
PSEN op2H-A-30-045/1
631041
GTIN: 4046548075564
PSEN op2H-A-30-045/1
Safety light guard, Type 2, PL c, hand protection (resolution 30 mm), protected field height 450 mm. Features: Muting, blanking, cascading, absence of dead zones. Programming is possible via Software PSENoptConfigurator or directly on the light guard. Supply voltage 24 V, connection via 18-pin pigtail cable on M12 connector. Connector M12 transmitter: 5- pin, receiver: Blanking 12-pin, muting 12-pin/5-pin. Pigtail cables are not supplied with the device.

On request

Save basket

Create a new order or get an individual offer

Select intended use