On network topologies constructed with coaxial cable (e.g. in accordance with 10Base2), the start and end of each segment must be terminated with a resistor. The value of the terminating resistor must correspond to the cable impedance. On 10Base2, this is 50 Ohms.
Pilz lndustrieelektronik GmbH
Gewerbepark Hintermättli
5506 Mägenwil
Schweiz
Telephone: +41 62 88979-30
E-Mail: pilz@pilz.ch
Telephone: +41 62 889 79 32
E-Mail: techsupport@pilz.ch