630931
PMMA acrylic tube for sealing and protecting a
safety light guard with a length of 30 cm of the series "PSEN op.../1".Th ...
On request
Close
You are on the Pilz international website
Please select a language or switch to a country
Choose your country to get national content
630960
Mounting kit with 4 mounting profiles for fixing a deviating mirror
of the series "PSEN op Mirror .../1" into the matchi ...
On request
630925
5 PMMA Altuglas plates of 120 cm in length with the corresponding
mounting brackets to protect the front screen of a
saf ...
On request
630924
5 PMMA Altuglas plates of 90 cm in length with the corresponding
mounting brackets to protect the front screen of a
safe ...
On request
630906
Installation bracket for the "PSEN op Mirror" series for directinstallation.
On request
630903
Deviating mirror 80 mm wide, with at length of 120 cm. For use with all
light guards of the PSENopt range < 120 cm. For ...
On request
630821
Sensor T-muting arm with passive reflector unit and matching
bracket on the basis light guard PSEN opXX-xx-xxx/1.
On request
630822
Sensor individual muting arm for basic light guard PSEN opXX-xx-xxx/1,
active.
On request
630824
Mounting set for fixing two muting arms to a basis
light guard of the PSEN opXX-xx-xxx/1 series.
On request
630820
Sensing device L-muting arm with passive reflector unit and matching
bracket on the basis light guard PSEN opXX-xx-xxx/1 ...
On request
631061
Mounting kit for installation without dead zones of two Advanced lightguards
over the corner.
On request
631070
Programming adapter for the PSEN opXX-A series. Using the PC Software
all the functions (muting, blanking, cascading) of ...
On request
630823
Sensor individual muting arm for basic light guard PSEN opXX-xx-xxx/1,
passive.
On request
630963
Integral mirrors for body protection resolution including PSEN op
Protective Column with a length of 165 cm for a beam d ...
On request
630962
Integral mirrors for body protection resolution including PSEN op
Protective Column with a length of 120 cm for a beam d ...
On request
630961
Integral mirrors for body protection resolution including PSEN op
Protective Column with a length of 100 cm for a beam d ...
On request
630964
Integral mirrors for body protection resolution including PSEN op
Protective Column with a length of 165 cm for a beam d ...
On request
630831
Single-channel light guard / receiver with N/O / N/C outputs, for use asa
muting sensor, supply voltage 24 V, connector ...
On request
630830
Reflected light sensor with N/O / N/C outputs for use as a mutingsensor,
supply voltage 24 V, connector M12, 4-pin. Plea ...
On request
630832
Single-channel light guard / transmitter, for use as a muting sensor,
supply voltage 24 V, connector M12, 4-pin. Please ...
On request
Added to Your Shopping Cart
Save basket
Create a new order or get an individual offer