Operational safety

Is a semi-automatic underfloor wheel lathe allowed to operate without supervision? Or is there a guide as to how near the operator must be to the machine?

The Machinery Directive applies for machinery that has been placed on the market since 1995. The Machinery Directive specifies the requirements of a machine.
A risk assessment is required for the machine, among other things.
The risk assessment should state the hazards emanating from the machine, any risk reducing measures, the limits of the machinery and its intended use, for example.
This assessment will determine the requirements of the machine's working environment and any need for an operator to be on-site.

Machines that were placed on the market prior to 1995 must at least comply with Annex 1 of the BetrSichV.
Annex 1 stipulates the minimum requirements for work equipment.



Pilz Automation Safety Canada L.P.
6695 Millcreek Drive, Unit 8
Mississauga, ON, L5N 5R8

Telephone: +1 905 821 7459
E-Mail: info@pilz.ca

Technical Support

Telephone: +1 888-315-PILZ (315-7459)
E-Mail: tech@pilz.ca

Was this article helpful?