text.skipToContent text.skipToNavigation
Close 

You are on the Pilz international website



Please select a language or switch to a country
Choose your country to get national content

RevPI Connect ­ RevPi Core Module

Product ID: Z9000017
Open Source IIoT Gateway, RevPi Connect, based on the Raspberry Pi Compute module 3. QuadCore with 1.2GHz and 1GB RAM and a 4 Gbyte eMMC Flash memory. Two Ethernet sockets, two USB sockets, one Micro-...  More

This product is no longer available. For more information on successor products or replacement parts, please contact Technical Support.


Open Source IIoT Gateway, RevPi Connect, based on the Raspberry Pi Compute module 3. QuadCore with 1.2GHz and 1GB RAM and a 4 Gbyte eMMC Flash memory. Two Ethernet sockets, two USB sockets, one Micro-HDMI socket and a Micro-USB socket. As an operating system the device has an adapted version of Raspbian with RT-Patch, housing dimensions (H x W x D): 96 x 45 x 110.5 mm, protection type: IP20.

Approval CE  
UKCA  
 
Height dimension 96  mm
Width dimension 45  mm
Depth dimension 110.5  mm
Net weight 222  g
Gross weight 230  g
 
WEEE classifikation (08/2018) 5 devices (feed size < 50cm)  
 
ECLASS version ECLASS-9.1  
ECLASS Reference Feature 27242290  
ETIM Version ETIM-7.0  
 

Optional accessories

GW Connector for Modular Gateways
GW Connector for Modular Gateways Z9000016
Jumper for PiBridge to connect the individual Revolution Pi modules. Universally suitable for all Revolution Pi base and expansion modules.
RevPi Con M­Bus VHP ext. module 169 MHz
RevPi Con M­Bus VHP ext. module 169 MHz Z9000018
The RevPi Con M-Bus VHP can be used to equip the RevPi Connect with 169MHz Wireless M-Bus. On the front of the expansion module there is an SMA socket for connecting an antenna (antenna not supplied with the unit), housing dimensions (H x W x D): 96 x 22.5 x 110.5 mm, protection type: IP 20.
RevPi Con M­Bus ext. module 868 MHz
RevPi Con M­Bus ext. module 868 MHz Z9000019
The RevPi Con M-Bus can be used to equip the RevPi Connect with 868 MHzWireless M-Bus. On the front of the expansion module there is an SMA socket for connecting an antenna (antenna not supplied with the unit), housing dimensions (H x W x D): 96 x 22.5 x110.5 mm, protection type: IP 20.
RevPi Con CAN extension module
RevPi Con CAN extension module Z9000020
The RevPi Con CAN can be used to equip the RevPi Connect with CAN bus . On the top, the module has a 4-pin connector to the CAN bus connection, Baud rate: up to 1 MBit/s, housing dimensions (H x W x D): 96 x 22.5 x 110.5 mm, protection type: IP 20.
Connector for CON Bridge Module
Connector for CON Bridge Module Z9000021
Jumper for ConBridge to connect the individual Revolution Pi modules. Only suitable for RevPi Connect in connection with RevPi Con expansion modules.