Accessories - PMC ProtegoD

Cable for PMCprotego and motor with terminal box Assembled on both sides with connector <> Ring cable shoe No. of wires and cross section (4 x 1.5 + (2 x 1.0)) Trailing, length: 5 m.

Cable for PMCprotego and motor with terminal box Assembled on both sides with connector <> Ring cable shoe No. of wires and cross section (4 x 1.5 + (2 x 1.0)) Trailing, length: 10 m.

Cable for PMCprotego and motor with terminal box Assembled on both sides with connector <> Ring cable shoe No. of wires and cross section (4 x 1.5 + (2 x 1.0)) Trailing, length: 15 m.

Cable for PMCprotego and motor with terminal box Assembled on both sides with connector <> Ring cable shoe No. of wires and cross section (4 x 1.5 + (2 x 1.0)) Trailing, length: 20 m.

Cable for PMCprotego and motor with connector design Assembled on both sides with connector <> round connector 8-pin No. of wires and cross section (4 x 1.5 + (2 x 1.0)) Trailing, length: 5 m.

Cable for PMCprotego and motor with connector design Assembled on both sides with connector <> round connector 8-pin No. of wires and cross section (4 x 1.5 + (2 x 1.0)) Trailing, length: 10 m.

Cable for PMCprotego and motor with connector design Assembled on both sides with connector <> round connector 8-pin No. of wires and cross section (4 x 1.5 + (2 x 1.0)) Trailing, length: 15 m.

Cable for PMCprotego and motor with connector design Assembled on both sides with connector <> round connector 8-pin No. of wires and cross section (4 x 1.5 + (2 x 1.0)) Trailing, length: 20 m.

Card can be used in PMCprotego Connector X5 (e.g. for Encoder emulation).

Fieldbus junction box for PMCprotego D (size 1.5 A to 24 A) Interfaces: CAN-in, CAN-out, RS232 with termination and monitoring voltage switch.

consisting of connector X9 and shielded terminal for devices up to 24 A.

suitable for the PMCprotego D/01-12A and PMCtendo DD4/01-20A Type: FZECQU 400 x 65-33 Performance at 40° C/100 % ED: 600 W Resistance value: 33 OHM Temperature switch 180° C: Signal contact 2A/24 V DC (DC11) UL version.

suitable for the PMCprotego D/24A Type: FZECQU 400x65-23 Performance at 40° C/100 % ED: 600 W Resistance value: 23 OHM Temperature switch 180° C: Signal contact 2A/24 V DC (DC11) UL version.

suitable for the PMCprotego D/01-12A and PMCtendo DD4/01-20A Type: FZZCQU 500 x 65-33 Performance at 40° C/100 % ED: 1600 W Resistance value: 33 OHM Temperature switch 180° C: Signal contact 2A/24 V DC (DC11) UL version.

suitable for the PMCprotego D/24A Type: FZZCQU 500 x 65-23 Performance at 40° C/100 % ED: 1600 W Resistance value: 23 OHM Temperature switch 180° C: Signal contact 2A/24 V DC (DC11) UL version.

Card can be used in PMCprotego Connector X5 (e.g. for Encoder emulation) Connector X3C (2 analogue inputs and 2 analogue outputs).

Fieldbus junction box for PMCprotego D (size 48 A and 72 A) Interfaces: CAN-in, CAN-out, RS232 with termination and monitoring voltage switch.

Cable for PMCprotego and motor with connector design assembled on both sides with connector <> round connector 8-pin No. of wires and cross section (4 x 4.0 + (2 x 1,5)) Trailing, length: 20 m.

Cable for PMCprotego and motor with connector design assembled on both sides with connector <> round connector 8-pin No. of wires and cross section (4 x 4.0 + (2 x 1,5)) Trailing, length: 5 m.

Cable for PMCprotego and motor with connector design assembled on both sides with connector <> round connector 8-pin No. of wires and cross section (4 x 4 + (2 x 1,5)) Trailing, length: 10 m.

Cable for PMCprotego and motor with connector design assembled on both sides with connector <> round connector 8-pin No. of wires and cross section (4 x 4 + (2 x 1,5)) Trailing, length: 15 m.

Power cable Cable assembled on both sides Connector <> round connector 8-pin M40 SpeedTec No. of wires and cross section 4 x 4.0 + 1 x (2 x 1.5) suitable for PMCprotego D.01-24 and the motors PMCtendo SZ. Length: 20 m.

Feedback cable for EnDat 2.2 Cable assembled on both sides Sub-D15 connector <> round connector 12-pin SpeedTec suitable for all PMC servo controllers (DD5, protego) and the motors PMCtendo SZ. Length: 5 m.

Feedback cable for EnDat 2.2 Cable assembled on both sides Sub-D15 connector <> round connector 12-pin SpeedTec suitable for all PMC servo controllers (DD5, protego) and the motors PMCtendo SZ. Length: 10 m.

Feedback cable for EnDat 2.2 Cable assembled on both sides Sub-D15 connector <> round connector 12-pin SpeedTec suitable for all PMC servo controllers (DD5, protego) and the motors PMCtendo SZ. Length: 20 m.